|
Your Basket is Empty
|
BUMPER REMOVAL
1) Jack up, remove front wheels
2) Remove front part of fender liners
3) Remove the 2 10mm nuts on studs at the corners toward the sides holding the nose to the body shell. Loosen 2 torx bolts holding black side clip
4) Remove the 6 torx bolts along the top of the nose
5) Remove 2 phillips screws at the bottom
6) Pull nose off, unclip aliens.
|
HEADLIGHT REMOVAL
Remove the 3 TORX BOLTS
1) Remove front one
2) Remove top one
3) Loosen bottom one (from inside the wheel well) and flip support bracket out of the way
4) Wiggle out and unplug
|
GET INSIDE
1) Take off 4 small metal CLIPS around the headlight
|
GET INSIDE
2) Use heat gun to soften the SEALANT, and open the clear cover
3) Remove the ORANGE CORNER carefully. (Don't break those small plastic holders around)
4) Snap on the new CLEAR CORNER
|
|
©2001-2024 The TT Shop All Rights Reserved
The TT Shop is not related to or endorsed by Audi
Company Reg: 5146165 - VAT No. GB 214 5306 43
|
Terms & Conditions - Google+ Produced, Maintained & Hosted by
Design Concept & Logo by Graphico Design
|
|
|